物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|---|---|---|
密度 | g/cc | lb/in³ | Fired at 5 hrs at 816°C |
机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|---|---|---|
断裂模数 | GPa @Temperature 540 °C | ksi @Temperature 1000 °F | Fired; ASTM C258 |
GPa @Temperature 815 °C | ksi @Temperature 1500 °F | ASTM C258 | |
GPa @Temperature 1095 °C | ksi @Temperature 2003 °F | ASTM C258 | |
GPa @Temperature 104 °C | ksi @Temperature 219 °F | Dried; ASTM C258 | |
抗压强度 | MPa @Temperature 1095 °C | psi @Temperature 2003 °F | |
MPa @Temperature 815 °C | psi @Temperature 1500 °F | ||
MPa @Treatment Temp. 540 °C | psi @Treatment Temp. 1000 °F | Cold Crush Strength; Fired at 540°C | |
MPa @Treatment Temp. 104 °C | psi @Treatment Temp. 219 °F | Cold Crush Strength; Dried 104°C |
热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|---|---|---|
最高工作温度, Air | °C | °F | |
流量 | @Temperature 540 °C | @Temperature 1000 °F | Permanent Linear Change; ASTM C210 |
@Temperature 815 °C | @Temperature 1500 °F | Permanent Linear Change; ASTM C210 | |
@Temperature 1095 °C | @Temperature 2003 °F | Permanent Linear Change; ASTM C210 |
构成要素属性 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
---|---|---|---|
Al2O3 | |||
氧化钙 | |||
氧化铁 | |||
氧化镁 | |||
Na2O | Includes K<sub>2</sub>O | ||
二氧化硅 | |||
TiO2 |