登录

Sibur 140-13A Compound 8/2 Polyvinyl Chloride (PVC)

PVC, Molded

Sibur

产品说明

Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a period of 20 minutes. For insulation of wires and cables operating in intervals of temperatures from -40°C to 70°C.

物理性能额定值 (公制)额定值 (英制)测试方法
密度 g/cc lb/in³
吸水率
Collected Volatile Condensable Material Loss in mass at 160°C during 6 hours
机械性能额定值 (公制)额定值 (英制)测试方法
抗张强度(断裂)>= MPa >= psi
伸长率 (断裂)
电气性能额定值 (公制)额定值 (英制)测试方法
体积电阻率>= ohm-cm
@Temperature 70.0 °C
>= ohm-cm
@Temperature 158 °F
>= ohm-cm
@Temperature 20.0 °C
>= ohm-cm
@Temperature 68.0 °F
热性能额定值 (公制)额定值 (英制)测试方法
软化温度 °C °F
脆化温度<= °C <= °F
Flammability Test In seconds, method A
材料描述测试方法
颜色Non-colored, white
Elongation Retained After Ageing80%Aged for 7 days at 100±2°C
Number of Inclusions<27 pscWith dimensions up to 0.5 mm
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端