RESOLE RX®647物性表-搜物性

基本信息
填料/增强材料	玻璃纤维增强材料
特性	超高韧性尺寸稳定性良好低烟度高强度抗菌性抗溶剂性良好的抗蠕变性耐碱耐酸
用途	薄膜按键开关泵件齿轮电气/电子应用领域电器用具动力/其它工具连接器汽车领域的应用外壳
机构评级	ASTM D 5948, Type GPI-5
形式	颗粒
加工方法	树脂传递成型压缩模塑注射成型

物理性能	单位制	测试方法
比重	g/cm³	ASTM D792, ISO 1183
紧缩率		ASTM D1895
收缩率
流动 : 模压成型	%	ASTM D955
流动方向	%	ISO 294-4
吸水率 (23°C, 24 hr)	%	ASTM D570, ISO 62

硬度	额定值	单位制	测试方法
洛氏硬度 (E 计秤)			ASTM D785, ISO 2039-2

机械性能	单位制	测试方法
拉伸应力
断裂	MPa	ISO 527-2
--	MPa	ASTM D638
弯曲模量
--	MPa	ASTM D790
--	MPa	ISO 178
弯曲强度
--	MPa	ASTM D790
--	MPa	ISO 178
压缩强度	MPa	ASTM D695

冲击性能	单位制	测试方法
悬壁梁缺口冲击强度
--	J/m	ASTM D256A
--	kJ/m²	ISO 180

热性能	单位制	测试方法
载荷下热变形温度
1.8 MPa, 未退火	°C	ASTM D648
1.8 MPa, 未退火	°C	ISO 75-2/A
线形热膨胀系数 - 流动	cm/cm/°C	ASTM D696
导热系数	W/m/K	ASTM C177

电气性能	单位制	测试方法
介电强度
-- ¹	kV/mm	ASTM D149
-- ²	kV/mm	ASTM D149
--	kV/mm	IEC 60243-1
耐电弧性	sec	ASTM D495

注射	额定值	单位制
料筒后部温度		°C
料筒中部温度		°C
射嘴温度		°C
加工（熔体）温度		°C
模具温度		°C
背压		MPa

注射说明
Plastication: 50rpmInjection Pressure: Set to give 3 to 5 seconds injection timeHold Pressure: 50 to 100% of injection pressureHold Time: 10 sec minimumCure Time, 0.125 in: 30 to 35 secThe value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM C518.The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with ISO 2577 using compression molded specimens.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.2%Flexural Strain, ASTM D790: 0.95%DTUL @264psi - Unannealed, ASTM D648, Post Baked: 550°FDielectric Strength, ASTM D149, 60 Hz, Method A, wet: 350 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 300 V/milCompressive Strength, ISO 604: 310 MPaDielectric Strength, IEC 243, Method A, wet: 13.5 V/milCompression and Transfer Molding Conditions: Preforming Pressure: 8000 to 12000 psi Preheat Temperature: 210 to 235 °F Preheat Time: 45 sec Mold Temperature: 330 to 360 °F Compression Mold Pressure: 2500 to 5000 psi Transfer Mold Pressure: 4000 to 6000 psi Cure Time, 0.125 in: 40 to 50 sec

注射说明

Plastication: 50rpmInjection Pressure: Set to give 3 to 5 seconds injection timeHold Pressure: 50 to 100% of injection pressureHold Time: 10 sec minimumCure Time, 0.125 in: 30 to 35 secThe value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM C518.The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with ISO 2577 using compression molded specimens.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.2%Flexural Strain, ASTM D790: 0.95%DTUL @264psi - Unannealed, ASTM D648, Post Baked: 550°FDielectric Strength, ASTM D149, 60 Hz, Method A, wet: 350 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 300 V/milCompressive Strength, ISO 604: 310 MPaDielectric Strength, IEC 243, Method A, wet: 13.5 V/milCompression and Transfer Molding Conditions: Preforming Pressure: 8000 to 12000 psi Preheat Temperature: 210 to 235 °F Preheat Time: 45 sec Mold Temperature: 330 to 360 °F Compression Mold Pressure: 2500 to 5000 psi Transfer Mold Pressure: 4000 to 6000 psi Cure Time, 0.125 in: 40 to 50 sec

备注
1 .	方法A（短时间）
2 .	方法B（逐步）

RESOLE RX®647

酚醛

Vyncolit N.V.

产品说明