Ineos Nova Zylar® 220 High Performance Styrenic, Acrylic Copolymer

Polymer,Thermoplastic,Acrylic (PMMA),Polystyrene (PS)

Ineos Nova

PDF物性文档下载

产品说明:

Excellent moldability, High clarity, Extended toughness and elongation, meets USP XXI specification for Class VI Plastics, Property retention after gamma irradiation

Applications: Display, medical devices, Office accessories, Small appliances, Break resistant CD jewel boxes, Toys

Injection Speed: Slow to moderate

All molded samples were an 1/8 inch thick unless noted.

General information about ZYLAR®: ZYLAR® acrylic copolymers are The Clear Alternative to polycarbonate, PETG, impact acrylic and clear ABS for applications that demand clarity and toughness and enhanced processing productivity. ZYLAR is a cost effective alternative in injection molding applications, with over 15 years of proven performance.

ZYLAR has proven performance in a variety of applications, including medical, floor care, appliances, consumer goods, office accessories and supplies, pens and mechanical pencils, commercial paper towel dispensers, point of purchase displays, cosmetics packaging, toys, electronics packaging, housewares, consumer & industrial, and other applications.

ZYLAR® acrylic copolymers provide value through enhanced performance, manufacturing productivity, ease of processing, and potential for capital avoidance through utilization of existing (styrenics) equipment and tooling.

Performance Attributes:

Product Capabilities

Customer Productivity & Processing

Information provided by NOVA Chemicals.

This specific grade was discontinued prior to the Styrolution acquision of the Zylar® product line.

Ineos Nova Zylar® 220 High Performance Styrenic, Acrylic Copolymer 物性表
物理性能额定值 (公制)额定值 (英制)测试方法
密度 g/cc lb/in³ ASTM D792
吸水率 ASTM D570
线性成型收缩率 cm/cm in/in ASTM D955
熔体流动速率 g/10 min
@Load 5.00 kg, Temperature 200 °C
g/10 min
@Load 11.0 lb, Temperature 392 °F
ASTM D1238
化学性能额定值 (公制)额定值 (英制)测试方法
Styrene Content Residual Styrene Monomer Content per Berre Laboratory Analytical Methods 0075
机械性能额定值 (公制)额定值 (英制)测试方法
洛氏硬度(R 级) ASTM D785
抗张强度(屈服) MPa psi 0.2 in/min; ASTM D638
伸长率 (断裂) 0.2 in/min; ASTM D638
弹性模量 GPa ksi 0.2 in/min; ASTM D638
弯曲强度 MPa psi 0.05 in/min; ASTM D790
弯曲模量 GPa ksi 0.05 in/min; ASTM D790
悬壁梁缺口冲击强度 J/cm ft-lb/in ASTM D256
热性能额定值 (公制)额定值 (英制)测试方法
载荷下热变形温度(1.8 MPa) °C °F ASTM D648
维卡软化温度 °C °F ASTM D1525
可燃性(UL94) 0.060 in for all colors
光学性能额定值 (公制)额定值 (英制)测试方法
折射率 ASTM D542
雾度 ASTM D1003
Transmission, Visible ASTM D1003
加工性能额定值 (公制)额定值 (英制)测试方法
加工温度<= °C <= °F
料筒后部温度 °C °F
料筒中部温度 °C °F
料筒前部温度 °C °F
加工(熔体)温度 °C °F
模具温度 °C °F
干燥温度 °C °F
干燥时间 hour hour
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
  忘记密码?   前往注册页面