登录

Polymer Resources NY66-IMG13-[color]H Nylon, 13% Glass Reinforced, Impact Modified, Heat Stabilized (DAM)

Nylon 66, 10% Glass Fiber Filled

Polymer Resources, LTD

产品说明

Process: Injection Molding
Notes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).

Information provided by Polymer Resources Corporation.

物理性能额定值 (公制)额定值 (英制)测试方法
密度 g/cc lb/in³ ASTM D792
线性成型收缩率 cm/cm in/in ASTM D955
机械性能额定值 (公制)额定值 (英制)测试方法
抗张强度(断裂) MPa psi ASTM D638
抗张强度(屈服) MPa psi ASTM D638
弯曲强度 MPa psi ASTM D790
弯曲模量 GPa ksi ASTM D790
悬壁梁缺口冲击强度 J/cm ft-lb/in ASTM D256
热性能额定值 (公制)额定值 (英制)测试方法
载荷下热变形温度(0.46 MPa) °C °F ASTM D648
载荷下热变形温度(1.8 MPa) °C °F ASTM D648
可燃性(UL94) 1/16 in
加工性能额定值 (公制)额定值 (英制)测试方法
料筒后部温度 °C °F
料筒中部温度 °C °F
料筒前部温度 °C °F
加工(熔体)温度 °C °F
模具温度 °C °F
干燥温度 °C °F
干燥时间 hour hour
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端