EMPILON® 8870

• Comply with WEEE/RoHS directive

• Comply with SONY SS-00259 6th requirement

• Free of Phthalates plasticizer

• Non-toxic and free of TetraBisPhenol A

• UL 94 V-0 flame class rating (UL File No.E196953)

EMPILON® 8800 series compound has excellent mechanical properties, good electrical property, low specific gravity and unique anti-flame ability without PBB and PBDE retardants, and are wildly applied to wire & cable, plug and flat cable for commu- nication applications. Hydrogenated Styrenic Block Copolymer is the main content of this 8800 series compound, its hardness range is from Shore A 65 to 95 and can be processed by ordinary plastic machinery for Injection, extrusion or calendaring etc.

EMPILON® 8800 series products are 100% recyclable and retain good mechanical properties after heat, weathering and solvent resistance testing and won't hydrolyze in water. They need 80~90°C dehumidified hot air at least 2 hours before any molding process and need to be continually dried during operation. For coloring, please select color master batch based on PE or EVA material with the exception of PVC, non-blooming black color compound is available. Higher screw speed and backpressure are needed for better colorant dispersion.

基本信息
特性	Block Copolymer 低密度 可回收材料 良好的电气性能 耐水解性 无毒性
用途	电线电缆应用 通信应用
RoHS 合规性	RoHS 合规
UL文件号	E196953
形式	粒子
加工方法	挤出 压延 注射成型

物理性能	额定值	单位制	测试方法
比重		g/cm³	ASTM D792
熔流率（熔体流动速率） (200°C/5.0 kg)		g/10 min	ASTM D1238

硬度	额定值	单位制	测试方法
肖氏硬度 (邵氏 A, 10 秒)			ASTM D2240

弹性体	额定值	单位制	测试方法
抗张强度		MPa	ASTM D412
伸长率 (断裂)		%	ASTM D412

热性能	额定值	单位制
脆化温度		°C

可燃性	额定值		测试方法
UL 阻燃等级			UL 94

补充信息	额定值	单位制	测试方法
击穿电压		V	ASTM D149

挤出	额定值	单位制
挤出机螺杆长径比L / D
挤出机螺杆压缩比

注射	额定值	单位制
干燥温度		°C
干燥时间		hr
料筒后部温度		°C
料筒中部温度		°C
料筒前部温度		°C
射嘴温度		°C
加工（熔体）温度		°C
模具温度		°C
注塑压力		MPa
注射速度
背压		MPa
螺杆长径比

注射说明
Hold Time: 5 sec.

挤出	额定值	单位制
干燥温度		°C
干燥时间		hr
料筒1区温度		°C
料筒2区温度		°C
料筒3区温度		°C
料筒4区温度		°C
料筒5区温度		°C
熔体温度		°C
口模温度		°C

挤压说明
Screen Pack: 80/100Conductor pre-heat temperature: 110-150°C